Products

DESCRIPTION

Basic Info

Model NO.	FE14W-P0-G1 COB9x 24V504S W10L05
Certification	FDA, GS, SAA, VDE, FCC, CCC, LVD, EMC, RoHS, CE
Power	14W
Emitting Color	Changeable
Voltage	24V /12V
IP Rating	IP20
LED Q.T.Y	504 PCS
Width of FPCB	10 mm
Cutable Length	50mm
Customization	Available
Transport Package	Carton
Specification	5m/roll
Trademark	Lumin
Origin	Shenzhen, China
HS Code	9405429000

Packaging & Delivery

Package size per unit product 22.00cm * 24.00cm * 70.00cm Gross weight per unit product 115.000kg

Product Description

Description

Adopt brand LED chip,high brightness,low light decay,lifespan more than 25000 hours

Color: white

All of materials comply with RoHS standards Easy to install and preserve,

can be bent freely,

with 3M adhesive tape on the backside High efficacy,

uniform illumination beam angle 180°

IP20--- non-waterproof

Application

Letter signage backlight

Building Decoration

Auditorium walkway lighting

Advertising signs,
light box lighting

Landscape decoration

 

Parameters

LED Q.T.Y	CCT	Voltage	FCPB Width	CRI	Power	Efficacy	IP	Weight	Cuttable Length
504PCS	2700K 3000K 4000K 6000K	24V/12V	10mm	RA90	[email protected] [email protected]	100lm/w	20	115g	17.85mm(12V) 41.67mm(24V)

User Instructions

1. Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply, and it cannot be fully
2. loaded to ensure that the power supply works at the correct and stable voltage.
3. We suggest 5 meters/roll for the led strip.If it is over 5 meters length, the brightness of LED will vary greatly.If the customer can accept the
4. case, length can be made over 5 meters/roll.
5. Adhesive tape on the back side of the strip,with its superior adhesive and weather resistance, and can be connected to any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability.Please test the adhesion of the led strip before installation.
6. Please pay special attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components on FPC, which may lead to damages of the strip .
7. In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.
8. The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.
9. It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection).